Alloy 601 UNS N06601 Ferrules


Alloy 601 UNS N06601 Ferrules

Specifications

UNS Number N06025
W.Nr.Number 2.4633
Standards ASTM B166, B168, B163, B167, B462, B517, B546, B564, B366
Alloy 602 CA (2.4633/N06025)

High Performance Alloys stocks and produces Inconel 601 in this grade in the following forms: Bar, sheet, plate, coil, pipe, tubes and ferrules. Request quote on this grade.

Overview

Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded.
The limiting chemical composition of Inconel 601 is listed in Table 1. The composition is a face-centered-cubic solid solution with a high degree of metallurgical stability. The alloy’s nickel base, in conjunction with a substantial chromium content, provides resistance to many corrosive media and high-temperature environments. Oxidation resistance is further enhanced by the aluminum content.

 

Characteristics.

The most important property of Inconel 601 is resistance to oxidation at very high temperatures up to 1250C. Even under severe conditions such as, cyclical heating and cooling. This is possible due to Inconel 601 having a tightly adherent oxide layer which is resistant against spalling.
Resistance to carburization is good, also resistant to carbon nitriding conditions.
Due to high chromium and some aluminum content, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.

 

Applications.

Trays, baskets and fixtures used in various heat treatments such as carburizing and carbon nitriding.
Refractory anchors, strand annealing and radiant tubes, high velocity gas burners, wire mesh belts etc.
Insulating cans in ammonia reformers and catalyst support grids used in nitric acid production.
Thermal reactors in exhaust system of petrol engines.
Fabricated combustion chambers.
Tube supports and ash trays in the power generation industry.

 

In what applications is Inconel 601 used?

  • Chemical Processing
  • Aerospace
  • Heat treating industry
  • Power generation
  • Heat treating muffles and retorts
  • Radiant tubes
  • Catalyst support grids in nitric acid production
  • Steam superheater tube supports

Yes! I am interested

Submit Your Requirement


Chemical Composition, %

Ni Cr Al C Mn Si Fe
61.5 22.5 1.4 0.05 0.3 0.2 14

ASTM Specifications

Pipe Smls Pipe Welded Tube Smls Tube Welded Sheet/Plate Bar Forging Fitting Wire
B167 B517 B167 B168 B166 B564 B366 B166

Mechanical Properties (Typical room temperature Properties)

Tensile (psi) .2% Yield (psi) Elongation (%)
80000 30000 35

  • Explore More Products




Looking for "Alloy 601 UNS N06601 Ferrules" ?