-
+91-9820400640, +91-8652211121 -
info@chemtechalloys.net
API 5L X52 PSL 1 Line Pipes
|
We source the raw material from the leading vendors and manufacturers in the market; thus, we are capable of fulfilling the exact requirements of the clients with our offered products. We can make timely delivery of bulk as well as retail orders courtesy a wide vendor, distributor and logistic service provider base.
Details :
- 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
- For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
- The sum of the niobium ,vanadium and titanium concentratons shall be ≤0.06%.
- Unless otheriwse agreed.
- Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Technical Specifications 01
| Chemical Composition | ||||||
| Mass fraction, based upon heat and product analysis a | ||||||
| Seamless Pipe | ||||||
| C | Mn | P | S | V | Nb | Ti |
| maxb | max.b | max. | max. | max. | max. | max. |
| 0.28 | 1.4 | 0.03 | 0.03 | d | d | d |
| Welded Pipe | ||||||
| 0.26 | 1.4 | 0.03 | 0.03 | d | d | d |
Technical Specifications 02
| Mechanical Requirements | ||
| Y.S | T.S | Elongation |
| Mpa(psi) | Mpa(psi) | |
| min | min | min |
| 360 (52 200) | 460 (66 700) | 0.28 |